What is SP Flash Tool?

SP Flash Tool (Smart Phone Flash Tool) is the official firmware flashing software developed by MediaTek (MTK) for their chipset-based Android smartphones. It is the primary tool used by technicians and developers to flash official firmware, custom ROMs, perform factory resets, bypass FRP, and repair MediaTek-based Android devices.

SP Flash Tool communicates with MediaTek devices through BROM (Boot ROM) mode, which allows direct access to the device storage bypassing the Android operating system. This makes it extremely effective for repairing bricked devices, fixing bootloops, and performing low-level flash operations in 2026.

SP Flash Tool Features

  • Download Mode — Flash complete firmware packages to MTK devices
  • Format Option — Format specific partitions or entire storage
  • FRP Bypass — Remove Google account lock via format user data
  • Firmware Upgrade — Upgrade to newer Android firmware versions
  • Read Back — Create backup of device partitions before flashing
  • Memory Test — Test device RAM and storage health
  • Scatter File Support — Uses MTK scatter files for partition mapping
  • Multi-Device — Flash multiple devices simultaneously

SP Flash Tool All Versions 2026

  • SP Flash Tool V5.1520 — Classic version for older MTK devices
  • SP Flash Tool V5.1724 — Improved USB detection and stability
  • SP Flash Tool V5.1920 — Support for MTK Helio chipsets
  • SP Flash Tool V5.2124 — Android 10 and 11 scatter file support
  • SP Flash Tool V6.x — Latest version with Android 14 and 15 support
  • SP Flash Tool Linux — Ubuntu and Linux compatible version

Supported Device Brands

SP Flash Tool supports all devices powered by MediaTek chipsets:

  • Tecno — All MTK-based Tecno models (Spark, Pop, Camon, Phantom series)
  • Infinix — All Infinix Hot, Note, Zero, Smart series MTK models
  • Itel — All Itel MTK smartphones
  • Samsung — Samsung models with MTK chipsets (A02, A03, A03s, A04)
  • OPPO — OPPO MTK models including A-series
  • Realme — Realme C series and other MTK models
  • Xiaomi Redmi — Redmi A1, A2 and other MTK Redmi phones
  • Symphony — All Symphony MTK devices
  • Walton — All Walton MTK smartphones

How to Use SP Flash Tool

Flash Firmware

  1. Download and install MTK USB VCOM Drivers
  2. Download the correct firmware for your device including scatter file
  3. Open SP Flash Tool as Administrator
  4. Click Choose and select the scatter file (MT6xxx_Android_scatter.txt)
  5. Select Download tab
  6. Power off your device and remove battery if possible
  7. Click Download button then connect USB cable
  8. Tool detects device automatically and starts flashing
  9. Green progress bar shows completion — device restarts automatically

FRP Bypass / Format

  1. Load scatter file in SP Flash Tool
  2. Select Format tab instead of Download
  3. Choose Manual Format or Auto Format
  4. Connect device in BROM mode
  5. Format operation removes Google account lock

Common Errors and Fixes

Error 8038 — Protocol Not Available

This error occurs when the device fails to enter BROM mode. Try removing the battery, using the back USB ports, or using a different USB cable. Also try running SP Flash Tool as Administrator.

Authentication Failed

Modern MTK devices require authentication bypass. Use MTK Auth Bypass Tool V6 alongside SP Flash Tool to overcome this restriction before flashing.

Conclusion

SP Flash Tool remains the most essential tool for anyone working with MediaTek Android devices in 2026. Its comprehensive feature set, broad device support, and free availability make it indispensable for mobile technicians and developers worldwide.