Samsung Galaxy A05s FRP Lock Overview

The Samsung Galaxy A05s (SM-A057F) running Android 14 with One UI 6 activates Factory Reset Protection after a factory reset. FRP requires the previously linked Google account credentials before the device can be set up and used again. When the account details are unavailable, specific bypass methods are required.

In 2026, the Samsung A05s is one of the most widely repaired budget Samsung devices, making its FRP bypass one of the most searched procedures among mobile technicians globally.

Samsung A05s Specifications

ModelSamsung Galaxy A05s (SM-A057F)
AndroidAndroid 14 (One UI 6)
ChipsetQualcomm Snapdragon 680
FRP TypeGoogle Account FRP + Samsung Account

Method 1 — ADB FRP Bypass (Recommended)

The ADB method is the most reliable for Samsung A05s FRP bypass in 2026.

  1. On the FRP screen, connect to WiFi network
  2. Tap Emergency Call and enter *#0*# to check if secret menu opens
  3. If not, use the accessibility → TalkBack method to enable USB debugging
  4. Connect Samsung A05s to PC via USB cable
  5. Open ADB FRP bypass tool on your PC
  6. Allow USB debugging authorization on the device when prompted
  7. Click FRP Remove in the ADB tool
  8. Device restarts — FRP removed successfully

Method 2 — Emergency Dialer Method

  1. On FRP screen tap Emergency Call
  2. Dial *#9090# or *#301279#
  3. If a diagnostic menu opens, navigate to USB settings
  4. Enable USB debugging mode
  5. Connect to PC and use ADB FRP tool

Method 3 — Samsung Find My Mobile

If you have another Samsung account on a trusted device:

  1. Go to findmymobile.samsung.com
  2. Log in with any Samsung account that was previously on the device
  3. Use the Unlock option to remotely disable FRP
  4. This is the official Samsung method for FRP removal

Method 4 — Firmware Flash (Guaranteed)

For guaranteed FRP removal on Samsung A05s, flash the official firmware using Odin Tool. Download the SM-A057F firmware and Odin from this website. Flash clears FRP permanently but erases all data.

✅ Pro Tip: Samsung A05s One UI 6 has stricter FRP than older versions. The ADB method works best on firmware versions prior to the latest security patch. For latest firmware, use Odin flash method for guaranteed results.

Troubleshooting Samsung A05s FRP

USB Debugging Cannot Be Enabled

If you cannot enable USB debugging through normal methods, use the TalkBack accessibility service. Activate TalkBack with two fingers, navigate to TalkBack settings, and look for global actions that allow you to access hidden menus.

Device Not Detected by ADB Tool

Install Samsung USB Drivers on your PC and restart. Try a different USB cable and USB port. Make sure you accept the USB debugging authorization prompt on the Samsung A05s screen.

Conclusion

FRP bypass on Samsung Galaxy A05s SM-A057F in 2026 is achievable through ADB method, emergency dialer, Samsung Find My Mobile, or Odin firmware flash. The ADB method is fastest while firmware flashing provides the most reliable guarantee. Download the required tools from this website and resolve FRP issues on your Samsung A05s today.