What is MTK USB Driver?

MTK USB Driver (MediaTek USB VCOM Driver) is the official Windows driver package required to establish USB communication between your Windows PC and MediaTek chipset Android devices. Without the proper MTK USB driver installed, tools like SP Flash Tool, MTK Auth Bypass Tool, and other MediaTek utilities cannot detect or communicate with connected MTK devices.

The MTK USB VCOM Driver creates a virtual COM port on your Windows PC through which flashing tools communicate with the MediaTek BROM (Boot ROM). In 2026, this driver is essential for any technician working with Tecno, Infinix, Itel, Samsung MTK, and other MediaTek-based Android smartphones.

Why Do You Need MTK USB Driver?

Without the MTK USB VCOM Driver properly installed, you will face these common issues:

  • SP Flash Tool shows "No Device Found" even when device is connected
  • MTK Auth Bypass Tool fails to detect device in BROM mode
  • Device appears with yellow exclamation mark in Windows Device Manager
  • ADB commands fail to detect MediaTek devices
  • Firmware flashing operations cannot begin

MTK USB Driver Features

  • VCOM Port Creation — Creates virtual COM port for BROM communication
  • All MTK Chipsets — Supports MT6580, MT6735, MT6737, MT6739, MT6750, MT6753, MT6761, MT6762, MT6765, MT6768, MT6771, MT6785, MT6853, MT6873, MT6877, and all other MTK chipsets
  • Windows 11 Compatible — Fully compatible with Windows 7, 8, 10, and 11
  • Auto Installation — Easy installer with automatic driver setup
  • 64-bit Support — Works on all 64-bit Windows versions
  • No Signature Required — Installer handles driver signature automatically

How to Install MTK USB Driver on Windows

Method 1: Standard Installation

  1. Download MTK USB Driver package from the download button on this page
  2. Extract the ZIP file to your desktop
  3. Open Device Manager on your Windows PC
  4. Right-click on your device showing as unknown
  5. Select Update Driver → Browse my computer
  6. Navigate to the extracted driver folder
  7. Click Next — Windows installs the driver automatically

Method 2: Installer Package

  1. Download the MTK USB Driver installer
  2. Right-click the installer and Run as Administrator
  3. Follow the on-screen installation wizard
  4. Restart your PC after installation completes
  5. Connect your MTK device to verify in Device Manager

Method 3: SP Flash Tool Auto Driver

  1. Open SP Flash Tool as Administrator
  2. SP Flash Tool can automatically install the required VCOM driver
  3. Go to Help menu → Install USB Driver
  4. Restart PC and try again

Verify Driver Installation

After installing the MTK USB Driver, verify it is working correctly:

  1. Open Windows Device Manager (Win + X → Device Manager)
  2. Power off your MTK device completely and remove battery
  3. Hold Volume Down and connect USB cable to PC
  4. Look for "MediaTek USB VCOM" or "MT65xx Preloader" in Device Manager
  5. If it shows without yellow exclamation mark, driver is installed correctly

Troubleshooting MTK Driver Issues

Driver Not Installing on Windows 11

Windows 11 has strict driver signature enforcement. To install unsigned drivers, restart Windows with driver signature enforcement disabled. Press Shift while clicking Restart → Troubleshoot → Advanced Options → Startup Settings → Disable Driver Signature Enforcement.

Device Shows as Unknown Even After Driver Installation

Try using a different USB cable (original preferred), different USB port (back ports on desktop), and ensure the device is properly in BROM mode with battery removed before connecting.

Conclusion

MTK USB Driver is the foundation of all MediaTek device service operations. Without it, no MTK flashing tool will function. Download the latest official MTK USB Driver from this page, install it following the guide above, and you will be ready to use SP Flash Tool, MTK Auth Bypass, and any other MediaTek utility without any connection issues.