Infinix Note 30 ISP Pinout Overview
The Infinix Note 30 (Model: X6833B) features MediaTek Helio G99 chipset with eMMC storage. The ISP pinout enables direct eMMC chip communication for hardware repair operations while the BROM test point forces MediaTek boot ROM activation on dead devices.
Infinix Note 30 Specifications
| Model | Infinix Note 30 (X6833B) |
| Chipset | MediaTek Helio G99 (MT6789) |
| Storage | eMMC 5.1 |
| Repair Tool | Easy Jtag Plus / Medusa Box |
eMMC ISP Pinout Details
The Infinix Note 30 uses MediaTek Helio G99 (MT6789) chipset. The eMMC ISP connections for this model:
- CLK — Critical clock signal for eMMC timing
- CMD — Command/response line
- DAT0 to DAT7 — 8-bit data bus for optimal performance
- VCC — eMMC core voltage (2.9V)
- VCCQ — Interface voltage (1.8V for HS200/HS400 modes)
- GND — Board ground
MT6789 BROM Test Point
The MT6789 BROM test point on the Infinix Note 30 PCB triggers BROM mode when shorted. This is particularly useful for Note 30 units affected by Anticrack P7 protection that prevents normal SP Flash Tool connection — the hardware BROM bypass circumvents software authentication checks.
Conclusion
Infinix Note 30 X6833B ISP Pinout and BROM Test Point are essential professional repair tools for this mid-range Infinix device in 2026. Use these hardware access methods when software repair tools cannot reach the device.